simple hot wire cutting machine

Specification
Item
Unit
PSQ300
PSQ600
 PSQ800
Cutting size
 mm
3000x1250x1250
6000x1250x1250
8000x1250x1250
Voltage transformer
kva
10
10
10
Total power
kw
11.55
11.55
11.55
Machine size
mm
5800x1900x2480
8800x1900x2480
10800x1900x2480
Machine weight
kg
1200
1800
2200
Feature
1.The main frame of the eps cutting machine is welded from square profile steel, with strong structure, high strength and no deformation;
2.While hot wire cutting machine adopt frequency control of motor speed and voltage adjustment device, realized multi-wire cutting and speed control. .
3.The eps cutting machine adopts converter speed governing advantageous in stable moving, large range(0-4m/min)of step-less speed governing, suitable for requirements of low-speed cutting and fast cutter-retract;
4.Voltage adjustment:Adopts 10KVA multi-tapped special transformer for adjustment with wide adjustable range and multiple voltages for the eps cutting machine.
5. The hot wire cutting machine has horizontal, vertical and cross cutting devices, and can realize 3-direction cutting, i.e. horizontal, vertical and cross cutting.
 
Nichrome wires 
The cutting wires for the EPS cutting machine are nichrome wires cr20ni80 which can be heated by the electricity,it can melt and cut the expanded polystyrene foam with high temprature. NiChrome Wire (NiCr) is also called hot wire in eps industry.It is good performance in working as cutting foam. it is resistant to corrosion and oxidation,and it can reach high temperature in just seconds.The NiChrome wires can be with high tensile strength and high melting points.It has perfect balance between energy requirement and good tensile strength.
 
Warranty clause 
We give one year warranty service.Parts are available free within one year in case of quality problem. 
Prev: Cantilever type EPS cutting machine for insulation sheets
Next: Foam Dedusting Crusher - EPS De dust machine