Dual shaft eps shredder machine output 20mm diameter EPS fillings
The design purpose of EPS grinder is to grind big EPS foam waste into different size of small balls/beads/granules etc as your demand.You can get recycled eps balls with size of 1cm,2cm,3cm.we can design and customize the machine with your demand.
Specification
|
Model no.
|
SW1000
|
SW1500
|
|
Inlet size
|
1000*800mm
|
1500*800mm
|
|
Motorreducer assembly power
|
3kw
|
5.5kw
|
|
Blower power
|
3kw
|
5.5kw
|
|
Rotating shaft qty
|
2 pcs
|
2 pcs
|
|
Output granules diameter
|
20mm
|
20mm
|
The dual shaft eps shredder is fully designed for recycling eps styrofoam waste with coordination of smaller diameter output and better capacity of eps shredding.The polystyrene waste will be reduced to nuggets which are to be sold or used again in package or board insulation line.The waste volume will be largely reduced by our eps recycling machine.
The shredder is designed with two rotating shafts on top and one fixed shaft thing below the two shafts.The polystyrene waste will be rotating until it shred to size similiar to holes of screening mesh.
Cause the inlet is big size,so,it works well with different size of eps styrofoam waste like foam package,foam block,eps trimmings etc.
It has below features:
1) Two rotating shafts and one fixed shaft.It is twin shaft eps shredder.
2) The blade layout on the shaft are redesigned for recycling the size of eps styrofoam.
3) The size of blade on the shaft of two shaft eps shredder is just good for working with the machine.
4) Big power of motor reducer and blower on the eps shredding machine.
5) The Machine height is good with the big power of machine,no materials can escape from inlet.
Youtube video