Home ›Products › Polyurethane Phenolic machinery

PU foam spray machine,PU casting machine

PU foam spray machine,PU casting machine

Item No.: CO33716534

Specification

Model No.	H200	H500
Raw materials flow capacity	4-8 kg/min	4-10 kg/min
Max working pressure	15MPA	25MPA
Raw materials proportion	1:1 (fixed)	1:1 (fixed)
Total power	9 KW	13 KW
Max tube length	60m (optional length)	90m (optional length)
Raw materials viscosity range	200-1000CPS (at working temprature)	200-1000CPS (at working temprature)
Heating range	0’C-80’C	0’C-80’C
Drive type	Fully pneumatic	Fully pneumatic
Electricity requirement	Single phase 220V 50Hz	Single phase 220V 50Hz
Electricity requirement	Three phase 380V 50Hz/60Hz	Three phase 380V 50Hz/60Hz
Air pressure	0.5-0.8MPA 1m³/min	0.6-0.9MPA 1m³/min
Heating tube power	3000W*2	4500W*2
Tube insulation heating power	2500W	3500W
Main machine weight	105 kg	120 kg
Total weight	184kg	204kg
Machine size	6007501100mm	6007501100mm
Package size	7509001470mm	9009001480mm

Configuration

Main machine	1 set
Spray gun	1 pc
Feeding pump	2 pcs
Insulated tube	1 package (15m)
Heating and gun tube	2 pcs (1.5m per pc)
Spare parts	1 set

High pressure PU foam spray machine is also called PU foam insulation machine,high pressure PU coating machine,it is can also be used as PU foam casting machine by replacing nozzle only.This machine is for polyurethane foam insulation work.

Application

insulations work for wall and roof,barrels,farm,container,vehicles,barn,cold storage, house,vessel etc.

Spare parts introduction

1. Heating system

Heater is imported from overseas with high precision temperature control and better characteristics. Raw materials will be heated fastly,evenly and costly.

Heater can work in cold temperature conditions.

2. Pressure booster pump

It takes 316 stainless steel materials which is more anti-frictional and corrosion resisting.

Pneumatic control is more secure,it can work without electricity.double protection for pump shaft is with anti-curing design and resetting functions when machine is off.

High quality sealing materials and its self compensating functions can extend its life.

3. Pressure display

It takes 316L stainless steel materials and overseas specialized silicone oil.

Stainless steel materials and silica gel sealing tech are with good sealing,it can be free from the dusty environments.

Silicone oil from Japan is good enough for the environment vibration and reduce the relative pulse effect.also,good with hot and cold temperature.

Mechanism and spring in the display is good with fatigue test.

4. Control panel

Resetting functions when machine is off.pump shaft for black materials can be in the seal protections when machine is off.

Emergency stop control is available.

Independent control for black and white materials.