vacuum block molding machine Generation III
Specification
| Mold Length
|
Configuration
|
Special Device
|
Block Size
|
|
2 m
|
automatic
|
|
2040*1020*530 mm
|
|
3 m
|
automatic
|
|
3060*1250*630 mm
|
|
6 m
|
Semi- automatic
|
|
6120*1250*630 mm
|
|
6 m
|
Automatic/generation II
|
|
6120*1250*630 mm
|
|
6 m
|
Automatic/generation III
|
|
6120*1250*630 mm
|
|
6 m
|
Automatic/generation II
|
Mold height adjustable |
6120*(1240-980)*630 mm
|
|
6 m
|
Automatic/generation III
|
6120*(1240-980)*630 mm
|
|
|
6 m
|
Automatic/generation III
|
Vacuum barrel
|
6120*1250*630 mm
|
|
3.6 m
|
Automatic/generation IV
|
Vacuum barrel,stronger inlet and exhaust, High configuration |
3660*1250*530 mm
|
|
6 m
|
Automatic/generation IV
|
6120*1250*630 mm
|
|
|
8 m
|
Automatic/generation III
|
Vacuum barrel
|
8160*1250*630 mm
|
** Automatical conveying device,automatical weighing and printing device are optional
Feature
1.EPS Block Molding Machine adopts PLC full computer touch screen displayer which can realize a full automatic cycle operation of mould opening, mould closing, material feeding, heating, heat preserving, vacuum cooling, demoulding and extruding-out of finished products.
2.The machine is welded by high-quality profile steel with aging heating treatment which can bring a high strength, non-deformation and high resistance to the expansive force from high-density products.
3. The machine is integrated with overseas advanced and special penetrating and heating techniques for shaping , and a high pressure suction fan for material feeding, cooling with a strong penetrability, favorable-adhesivity, low consumption of steam, high speed of shaping and low water content so as to ensure the uniformity of inside and outside of the product.
4. There are ventilation panel inside the block mold respectively at the 6 directions of its top, bottom, left, right, front and back, which will increase the airflow instantaneously.
2.The machine is welded by high-quality profile steel with aging heating treatment which can bring a high strength, non-deformation and high resistance to the expansive force from high-density products.
3. The machine is integrated with overseas advanced and special penetrating and heating techniques for shaping , and a high pressure suction fan for material feeding, cooling with a strong penetrability, favorable-adhesivity, low consumption of steam, high speed of shaping and low water content so as to ensure the uniformity of inside and outside of the product.
4. There are ventilation panel inside the block mold respectively at the 6 directions of its top, bottom, left, right, front and back, which will increase the airflow instantaneously.
Warranty clause
We give one year warranty service. Parts are available free within one year in case of quality problem
Youtube Video